niferro.blogg.se

23 Maj 2022 - 00:26
Construction master pro desktop model 44080 v3.1 manual
Allmänt
Construction master pro desktop model 44080 v3.1 manual










  1. #Construction master pro desktop model 44080 v3.1 manual install
  2. #Construction master pro desktop model 44080 v3.1 manual software
  3. #Construction master pro desktop model 44080 v3.1 manual download

If you need to carve the object in different thickness, you need to place the object in the engraving platform and adjust the focus manually, when in the first operation, it is recommended to use gray cardboard (in the package list) to carve > Adjust the focal length of the laser, factory default settings the focal length of the gray cardboard, there is no need to do any adjustment. > Open the packaging, remove the fixed tape and pearl cotton on the machine > Obtain a USB rechargeable head (5V1A) (Apple, Samsung, Huawei mobile phone head can be, Support 5V1A or more) > Obtain a desktop computer or laptop computer (computer operating system requirements is WinXP, window 7, win8, win10) We will use the gray cardboard to carve as an example to explain, please follow the instructions to do your operation.

#Construction master pro desktop model 44080 v3.1 manual software

The software is compatible with Win XP, Win 7, Win 8, Win 10, system.

construction master pro desktop model 44080 v3.1 manual

NEJE DK-8-KZ, DK-8 PRO-5, DK-6 PRO-5, JZ-5, JZ-5-T, DK-5 Pro-5 engraver comes with a 1GB micro SD card, the files on the SD card are including the USB-Serial driver, engraver software and few JPG photos as shown in the figure below.

#Construction master pro desktop model 44080 v3.1 manual install

The same situation applies to the Laser Engraver, you need to install the USB-Serial driver which allows the Laser Engraver to talk to the computer, and you need to install the engraver software to control the Laser Engraver.

  • The facility no usage for a long time can automatically lead to dormancy mode.īefore you can use a computer and laser facility for engraving, you need to install a facility driver which allows the facility to communicate with the computer, furthermore, you need to install application software on your computer so that you can start your engraving.
  • Power by security and polymer battery, no explosion risk of spontaneous combustion.
  • Please place the facility on a flat desktop.
  • Please pay attention to keep the surface of the facility clean.
  • It is prohibited for children to use the laser facility without adult supervision.
  • The suggested time of use is not more than one hour at once except is mentioned other.
  • Please keep the laser facility away from flammable objects.
  • The laser facility is powered by 5V, 2A USB charger, Do not use other power.
  • The laser facility passed the CE, safety control, and have no radiation.
    • So please do not remove the laser to shoot your eyes.
  • The laser does not have Radiation, but when it works the temperature is getting up to 400 centigrade.
  • Please do not touch the laser or a laser beam when the facility is working.

    • construction master pro desktop model 44080 v3.1 manual

    For engraving metal use NEJE MASTER 7W OR NEJE MASTER 20W) Important safety information

    #Construction master pro desktop model 44080 v3.1 manual download

    Download Neje software and driver at the end of the article












    Construction master pro desktop model 44080 v3.1 manual
    0 kommentar(er)
    Om Mig: